Ralph Lauren Polo Prep 300 Matt Havanna & Pewter 398

Click to zoom

Ralph Lauren

Ralph Lauren Polo Prep 300 Matt Havanna & Pewter 398

£17.99

Exuding timeless collegiate sophistication, these Ralph Lauren frames marry a classic matte Havana finish with sleek pewter accents for an effortlessly refined look.

Description

Ralph Lauren POLO PREP 300/ MATT MATT HAVANNA ON PEWTER STAINLESS STELL FRAMES / 44mm LENS WIDTH / 20mm DISTANCE BETWEEN LENSES/ 125mm ARM LENGTH . COL O2FV FRAME HEIGHT 34MM OVERALL WIDTH 125MM METAL FRAMES WITH TEMPORARY LENSES FITTED Optical Frames PEASE CHECK YOUR MEASUREMENTS SEE INFORMATION BELOW The Bridge Width The bridge width is the minimum horizontal distance between the nasal surfaces of the rims on a plastic or metal frame, or the minimum horizontal distance between the nasal surfaces of the lenses in rimless frames. If a frame has adjustable nose pads on metal arms various modifications can be made in order to achieve a satisfactory fit; Increasing the distance between the pads may be appropriate in cases when: The frame size is sitting too high on the face The bifocal segments or distance section of a progressive (Varifocal) lens are too high The bridge is too small a fitting for the nose The distance from the eye to the lens is too great Decreasing the distance between the pads may be appropriate in cases when: The frame sits too low on the face The bifocal segments or distance section of a progressive (Varifocal) lens are too low The bridge is too low for the nose The lenses are sitting too close to the eyes and lashes The Lens Width The lens width is the distance between the vertical sides of a rectangle containing the lens shape (in mm), the diagram above illustrates this. The sizes for the lens width and bridge width can usually be found on your current glasses by looking on the inside of the frame (usually printed on the arms or the bridge) The Arm Length The arm length is measured from the dowel point to the extreme end of the side, this is made up of the length to the bend and the length of the drop to give the overall length of side. When choosing a new spectacle frame check your current frame sizes by looking for the printed measurements (usually found on the arm or bridge), for example: 52-16-135 52 (mm) will represent the lens width 16 (mm) will represent the bridge width 135 (mm) will represent the overall length of the arm Overall Frame Width PLEASE NOTE THAT WE MEASURE THE OVERALL WIDTH FROM THE OUT SIDE OF THE FRAME INCLUDING THE LUGS SHOWN IN THE DIAGRAM