Designer Leodm Ne5200 Cherry Brandy

Click to zoom

LEODM

Designer Leodm Ne5200 Cherry Brandy

£22.99

Exude timeless sophistication with these Leodm optical frames, featuring a rich cherry brandy hue that brings vintage elegance to every look.

LensCHERRY BRANDYmm

ColourOPTICAL FRAMES

Description

LEoDM OPTICAL FRAMES ARE HIGH QUALITY DESIGNER FRAMES MADE IN GERMANY THE STOCK WE ARE SELLING IS COMPOSED MAINLY OF DISPLAY AND SAMPLES, ALL NEW BUT OLD STOCK. MANY INNOVATIVE DESIGNS THAT YOU WILL NOT FIND ANYWHERE ELSE THESE FRAMES ARE OF AN INTERESTING ARCHITECTURAL STYLE , VERY ORIGINAL 38/ TRANSLUCENT CHERRY BROWN WITH A VERTICAL TIGER STRIPE FRAMES/ 50mmLENS WIDTH /16mm BETWEEN LENSES/140mm ARM LENGTH LENS HEIGHT 32MM OVERALL WIDTH 132MM FINE DETAIL AND DELICATE STYLING DOUBLE ACTING HINGES Optical Frames PLEASE CHECK YOUR MEASUREMENTS SEE INFORMATION BELOW The Bridge Width The bridge width is the minimum horizontal distance between the nasal surfaces of the rims on a plastic or metal frame, or the minimum horizontal distance between the nasal surfaces of the lenses in rimless frames. If a frame has adjustable nose pads on metal arms various modifications can be made in order to achieve a satisfactory fit; Increasing the distance between the pads may be appropriate in cases when: The frame size is sitting too high on the face The bifocal segments or distance section of a progressive (Vari-focal) lens are too high The bridge is too small a fitting for the nose The distance from the eye to the lens is too great Decreasing the distance between the pads may be appropriate in cases when: The frame sits too low on the face The bifocal segments or distance section of a progressive (Varifocal) lens are too low The bridge is too low for the nose The lenses are sitting too close to the eyes and lashes The Lens Width The lens width is the distance between the vertical sides of a rectangle containing the lens shape (in mm), the diagram above illustrates this. The sizes for the lens width and bridge width can usually be found on your current glasses by looking on the inside of the frame (usually printed on the arms or the bridge) The Arm Length The arm length is measured from the dowel point to the extreme end of the side, this is made up of the length to the bend and the length of the drop to give the overall length of side. When choosing a new spectacle frame check your current frame sizes by looking for the printed measurements (usually found on the arm or bridge), for example: 52-16-135 52 (mm) will represent the lens width 16 (mm) will represent the bridge width 135 (mm) will represent the overall length of the arm Overall Frame Width Another measurement to consider would be the overall width of the frames, the diagram above illustrates this, it is important to note, aside from two times the lens width plus the bridge width the overall width is also dictated by factors such as the thickness of the rims of the frames and how swept out the lugs are from the frame. Our measurements give an approximate indication to the overall width taking into consideration the lenses and bridge not the lugs of the frame, this measurement is approximate and will vary according to the type and design of the frames.